Vessel segment 02 / 08 · Sailing Yacht
The forward berth is the coldest surface you sleep
On a monohull the V-berth cushion follows the hull directly. Below the waterline the laminate holds sea temperature while two people raise humidity in a closed forepeak. Moisture collects on the underside of the cushion, not on top of it.
Recommendation
15 mm gives enough gap for hull-contact berths while staying flush under the cushion cut-out. For quarter berths and settees with limited depth, Airflow Standard 10 mm is sufficient.
Installation
Three steps, no tools
01
Lift the cushion
Remove the berth cushion and clear the board. No fasteners, no adhesive, nothing to drill.
02
Lay the fabric
Place the cut panel over the full berth area, running the length of the berth. Edges may be trimmed with scissors on board.
03
Replace and close
Set the cushion back on top. The gap works from the first night and stays open under sleeping load.
Request a sample or specification sheet
Response within 1 business day
Free samples for trade accounts
Worldwide shipping from Germany
OEKO-TEX Standard 100 certified
Contact
Tell us what you are fitting
Supplier
Pankoke & Hellmich GbR
Fosse Bredde 2533758 Schloß Holte-Stukenbrock
Germany
Response within 1 business day
Trade enquiries welcome
Trade enquiries welcome